How do I correctly replace the Canon MC-31 Maintenance Tank?

 

How do I correctly replace the Canon MC-31 Maintenance Tank?

 

 

 

Printer Prompts Replacement

 

When the MC-31 chip detects that the waste ink level is full, the printer will display "Maintenance Tank Full."

 

 

Turn off the printer.

 

Ensure safety to avoid static electricity or operating errors.

 

 

Open the maintenance compartment cover.

 

Locate the MC-31 tank installation location (usually at the bottom of the printer).

 

 

Remove the old maintenance tank.

 

Be careful to avoid spilling waste ink; use a paper towel to assist.

 

 

Install the new maintenance tank.

 

Push the MC-31 maintenance cartridge firmly into the slot until you hear a click.

 

 

Confirm Chip Recognition

 

Turn on the power. The printer will automatically recognize the MC-31 maintenance tank ink cartridge chips, ensuring they are functioning properly.

 

 

 

The printer does not recognize the new maintenance tank: Check that the MC-31 chip is properly installed.

 

The waste ink warning persists: Restart the printer or perform a supplies reset.

 

Too frequent replacement: Check if the printer's cleaning settings are set too high.

 

 

 

Avoid frequent deep cleaning to reduce waste ink.

 

Check the MC-31 tank regularly to prevent damage caused by overfilling.

 

Use high-quality ink to extend the life of the printhead and maintenance tank.

 

 

Contact now