What Is The Correct DTF PET Film

1. The texture of the pattern after hot stamping is like PU glue, with strong elasticity, no deformation, and a softer hand feel than glue (30-50% softer than patterns printed on oily coatings). The feel can be adjusted according to customer requirements.

2. Suitable for most inks on the market, 100% ink can be printed freely without ink accumulation or flow.

3. The surface of the film is dry and can be sprinkled with 50-200 mesh powder, which is non stick. The picture is the picture, and the powder is the powder. Stick powder on areas with ink, and clean areas without ink.

4. Easy and clean demolding, no ink left on the printing film, and no layers left on the pattern. Can distinguish between cold tearing and hot tearing, but must be stable. The stability here is reflected in the consistency of different batches, so that the color, shaking powder, and demolding are all stable.